-
QUM-96HA Ride on Power Trowel Machine Adaptor Honda Surface Float Concrete Finishing Power Trowel for Polishing
Dynamic Ride-on Trowel series could greatly increase work efficiency for surface of concrete rasied paste and trowel, smooth out.Widely used in building large area ground like factory, warehouse, square and so on.
-
QUM-65 Dynamic power trowel concrete 36 inches ride on power trowel machine
1. Variable clutch provides proper torque and speed range to match concrete conditions.
2. Ride-on operation reduces intensity of labor and increase efficiency of work.
3. With dual rotor, heavier weight and much better compaction, the efficiency is higher than walk-behind power trowel.
4. Safety switch can shut off engine at once to ensure security of operator.
5. Low barycenter design provides stable operation.
-
QUM-96HA Gasoline Concrete Float Machine Hydraulic Ride on Power Trowel Machine with low fuel consumption
1. Variable clutch provides proper torque and speed range to match concrete conditions.
2. Ride-on operation reduces intensity of labor and increase efficiency of work.
3. With dual rotor, heavier weight and much better compaction, the efficiency is higher than walk-behind power trowel.
4. Safety switch can shut off engine at once to ensure security of operator.
5. Low barycenter design provides stable operation.
6. 5 blades design, much better compaction result.
-
QUM-80 High quality concrete double power trowel machine Ride On Type Concrete Power Trowel
Equipped with dynamic power
Ride-on power trowel can be used in surface finishing of concrete road, terrace, boatyard, airport and floor etc.
1. The speed is 150 revolutions per minute during construction, with high efficiency and good effect
2. Heavy load gearbox, high temperature oil leakage is not allowed
3. A variety of blade options, allowing better and faster construction
4. Honda twin cylinder gasoline engine, powerful and reliable
5. High efficiency transmission system to ensure effective output of engine
-
QUM-65 DYNAMIC KP460E Edging Power Trowel Series with CE for sale
Ride-on power trowel can be used in surface finishing of concrete road, terrace, boatyard, airport and floor etc.
1. High working efficiency, one machine driving type is equivalent to six walking type
2. Flexible operation. The size of the machine is much smaller than that of 1m and 1.2m, and it can adapt to work in a narrow area
3. The speed of the working surface is fast, and the working plate turns 160 per minute, so the light collection effect is better
-
-
DJM-600 600mm/24 inches diameter electric mini concrete power trowel
DYNAMIC Edger Trowel uses a heavy-duty gearbox with excellent performance and durability.
High frequency motor is used for power, with fast speed and high efficiency.
Folding handle design, convenient for transportation and storage.
Robust plastering system, stable and reliable.
-
QUM-96HA 2.4 m/96 inch working diameter hydraulic control ride-on trower
Dynamic Ride-on Trowel series could greatly increase work efficiency for surface of concrete raised paste and trowel,smooth out Widely used in building large area ground like factory,warehousesquare and so on
◆Hydraulic type steering system with rapid response and easy control
◆Ride-on operation reduces intensity of labor and increase efficiency of work
◆With dual rotor, much heavier weight and much better compaction, the efficiency is higher than walk-behind power trowel Anon-overlapping is designed for two pans working
◆Low barycenter design provides stable operation
◆A strong power supplied by Honda or Kohler gasoline engine
◆Left and right sides 5 blades design, much better compaction result
-
QUM-96 2.4 m/96 inch working diameter mechanical manipulation control ride-on trower
Dynamic Ride-on Trowel series could greatly increase work efficiency for surface of concrete raised paste and trowel,smooth out Widely used in building large area ground like factory,warehousesquare and so on
◆Mechanical manipulation type steering system with rapid response and easy control
◆Ride-on operation reduces intensity of labor and increase efficiency of work
◆With dual rotor, much heavier weight and much better compaction, the efficiency is higher than walk-behind power trowel Anon-overlapping is designed for two pans working
◆Low barycenter design provides stable operation
◆A strong power supplied by Honda or Kohler gasoline engine
◆Left and right sides 5 blades design, much better compaction result
-
QUM-65 Two working plates 800mm/30in Gasoline engine Ride-on trowel
Ride-on power trowel can be used in surface finishing of concrete road, terrace, boatyard, airport and floor etc.
1. High working efficiency, one machine driving type is equivalent to six walking type
2. Flexible operation. The size of the machine is much smaller than that of 1m and 1.2m, and it can adapt to work in a narrow area
3. The speed of the working surface is fast, and the working plate turns 160 per minute, so the light collection effect is better
4. Honda gasoline engine, simple maintenance, stable and reliable performance
5. Heavy load turbine box with large gear can effectively dissipate heat and prevent high temperature oil leakage
-
QJM-1200 1.2m/46inch working diameter walk-behind power trowel
Dynamic Handle Trowel series could greatly increase work efficiency for surface of concrete raised paste and trowel, smooth out. Widely used in building large area ground like factory, warehouse, square and so on.Over-built gearbox with high performance and durability
Safety switch can shut off engine at once to ensure the security of operator
Adjustable handle for different height of operators
Dynamically balanced of blades when running
Bicycle-style handle is available
-
QJM-1000 1m/36inch walk behind power trowel concrete cement
Dynamic Walk-behind Power Trowel Series diameter 24/30/36/45 inches Stable quality and reliable performance.
Over-built gearbox with high performance and durability.
Safety switch can shut off engine at once to ensure the security of operator.
