Compared with traditional products, the outrigger laser leveling machine has many advantages. It can reduce the construction joints of the floor and achieve seamless construction. At the same time, it can also reduce the maintenance cost in the later period. When using the equipment, Since it will come into contact with concrete, it must be operated in accordance with the correct requirements, otherwise it will cause damage to the equipment. Today, I will give you a specific introduction to the precautions for the use of the down-reach laser leveler.
1. Pay attention to the temperature. When using the outrigger laser leveling machine, the temperature must be controlled well, and do not allow it to be overloaded for a long time at low temperatures. It must be operated only after the temperature reaches the specified requirements. It cannot be operated because it did not appear at the time. Abnormalities will not be observed carefully. At the same time, they must be prevented from working at high temperatures. During the operation of the equipment, the values on the thermometer should be checked regularly. If any abnormalities are found, the machine should be shut down immediately.
2. When the outrigger laser leveler is abnormal, if you can’t find the real cause of the failure, you can’t leave it alone and continue to use it. When you want to use it normally, check the cooling system regularly. If the water-cooled type is The equipment should be inspected before work every day, and cooling water should be added in time. For air-cooled equipment, the dust on it should be cleaned regularly to ensure the normal heat dissipation.
3. Prevent impurities. If the equipment is used in places with more complicated environmental conditions, use high-quality lubricants and parts to clean up harmful impurities in time, and also do on-site protection work to prevent all kinds of impurities from entering the equipment. internal.
There are many precautions for the use of the outreach laser leveler. In addition to focusing on the above points, you must also pay attention to not let the equipment be affected by chemical corrosion. If it is used in bad weather or serious air pollution At the same time, strict protective measures must be taken to prevent rainwater and not affect the normal operation of the equipment.
Post time: Apr-09-2021